AquaDuty Peripheral Pump
Applications
Recommended for pumping chemically non aggressive clean water containing no abrasive particles. Suitable for reliable, simple and economical domestic use.
Particularly suitable in combination with pressure or flow control for garden irrigation.
Features
Induction Motor: 230V
Insulation: Class B
Protection: IPX 4
Pump Body: Cast iron
Motor Bracket: Cast iron with inserts
Impeller: Brass
Motor Shaft: Steel
Mechanical Seal: Ceramic/Graphite
Max. Suction: 8m at sea level
Max. Liquid Temp: 60°C
Max. Amb. Temp: 40°C
AquaDuty Pressure Controller
Applications
Automatic pressure control systems now available – high reliability and functional safety, included from the AquaDUTY flow control system. Easy and quick to install. AquaDUTY allows the automation of any kind of pressure pump capable of generating a minimum of 1,5 bar. The cut-in pressure is adjustable. Additionally, dry run protection is integrated.
Features
Rated Voltage: 220V - 240V 110V - 115V
Max. Current: 30(16)A
Frequency: 50-60Hz
Max. Power: 100-120V: 2Hp; 220V-240V: 3Hp
Joint Screw: 1" or 1 1/4" male
Protection Grate: IP65
Starting pressure to choose: 1.2 bar or 1.5 bar or 2.2 bar
Coverage
As a complete new device, it can guarantee the optimum control of electric pumps in a plumbing system. Being an intelligent mix of hydraulic and electronic engineering, the control maintains both pressure and flow and controls the operation of the pump automatically. It needs no pressure tank as in the traditional systems. There are no plenum chambers to recharge and no
irritating variation in pressure and in flow at the point of use. No adjustment or maintenance is required. It is absolutely dependable, durable and simple to install.
Functioning
The starting operation archived, the unit is programmed to perform all the pump control operations automatically. When particular operational breakdowns occur, such as water failure, obstruction of the suction pipe etc, the unit recognizes the breakdown and red LED failure lights up, at the same time a stop signal is sent to the pump to prevent damages caused by its working in the absence of water. Rectification of the failures that have caused the blockage, allows the system to be restarted by pressing the Reset button.